11 / 20
Which of the following Q codes are used to communicate pressure settings in RTF air-ground communications?
  • A
    QNH and QDR
  • B
    QFE and QNH
  • C
    QFE and QDM
  • D
    QDM and QDR
Aviation Q-Codes
  • QDM - Magnetic heading TO a station (Magnetic to the station).
  • QDR - Magnetic bearing FROM a station (Magnetic from the station).
  • QTE - True bearing FROM a station (True from the station).
  • QUJ - True heading TO a station (True to the station).
  • QFU - Magnetic orientation of runway.
  • QFE - The observed pressure at a specified datum (usually aerodrome or runway threshold elevation) corrected for temperature.
  • QNH - The altimeter sub-scale setting to obtain elevation when on the ground. QNH equals QFE reduced to mean sea level (MSL) pressure using the standard atmosphere lapse rate.

ICAO Doc 8400

RT. Radio Telephony

QFE. Atmospheric pressure at aerodrome elevation (or at runway threshold)

QNH. QFE reduced to MSL using the assumed conditions of standard atmosphere. Altimeter sub-scale setting to obtain elevation when on the ground
  • From the available options, the only code expressing pressures are QNH and QFE.

Your Notes (not visible to others)



This question has appeared on the real examination, you can find the related countries below.

  • Austro Control
    68
  • France
    66
  • Spain
    40
  • United Kingdom
    33
  • Germany
    28
  • Greece
    16
  • Poland
    16
  • Italy
    11
  • Portugal
    11
  • Czech Republic
    9
  • Ireland
    9
  • Latvia
    9
  • Sweden
    9
  • Lithuania
    7
  • Romania
    6
  • Norway
    5
  • Slovakia
    4
  • Bulgaria
    3
  • Luxembourg
    3
  • Switzerland
    3
  • Hungary
    2
  • Iceland
    2
  • Slovenia
    2
  • Belgium
    1
  • Finland
    1
  • Malaysia
    1
  • Netherlands
    1
  • Pakistan
    1